Window Etch / Manifestation - Opaque Circles. Pre Spaced Single Row
£22.95
In stock
SKU
windowetchcircle
- Buy 5 for £21.80 each and save 5%
- Buy 10 for £20.66 each and save 10%
Opaque etch effect circles, available in a range of sizes, spaced at 50mm intervals.
Come on a ready-spaced, easy-to-apply application tape. This product is sold as a single row - two rows are shown on the image for illustration.
The standard size is 50mm in diameter and comes in 1200mm lengths.
Our window safety stickers enable you to comply with current HSE regulations.
Opaque etch effect circles, available in a range of sizes, spaced at 50mm intervals. See drop down for alternative sizes. All our circles come on a ready spaced, easy to apply application tape. This products is sold as a single row - two rows are shown on the image for illustration.
Standard size is 50mm diameter. All come in 1200mm lengths.
Our window safety stickers enable you to comply with current HSE regulations.
Current HSE regulations state that ;-
"The Regulation requires that every window or other transparent or translucent surface in a wall, partition, door or gate should, where necessary for reasons of health or safety, be of a safety material or be protected against breakage of the transparent or translucent material; and be appropriately marked or incorporate features to make it apparent.
modify the glazing to reduce the risk of injury eg, by applying a safety film which prevents it shattering in a dangerous manner, or by marking it to prevent people bumping into it"
http://www.hse.gov.uk/pubns/indg212.htm
Condition | New |
---|---|
Manufacturer | Vinyl Cut Graphics |
Extra Information | Professional Grade - Comes sandwiched between a backing sheet and a application tape, Full fitting instructions will be provided, Weatherproof, Marine Safe after cured, Application Temperature Minimum 8 deg C, Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material, Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure respectively, The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. |
Write Your Own Review